PVC Outside Wall siding Production Machinery Decorative Sheet Extrusion line.
PVC Vinyl Marble Siding Wall Panel Extrusion Machine Line.
1.1.PVC vinyl Siding panel is applied in house, office building, villa, and wall protection.Due to it`s top layer covered with PVC, ASA, or PMMA, it can be used in hot, cold dry or wet place, can bear long time sun light, wind, rain and bad weather.
1.2.This line can be equipped with different pattern rollers, easily changeable.Punch on-line, it is more economical way.
1.3 PVC vinyl siding is mainly produced by rigid PVC.Used for building external wall;Not only protect the wall, but alsobeautiful as decoration.It make the wall looks like wood board, looks simple and natural, but no need consume wood.
1.4 PVC vinyl siding can be recycled, producing cost is lower than cement and ceramic tile.It's green buliding materials, good or environmental protection.
PVC vinyl siding can be installed easily, can be combined with each kind of structural wall, not affected by seasons, easy clean(can be washed by water);No need maintain (without paint and coating);Fireproof, moisture resistance, corrosion resistance, aging resistance.
2. PVC decorative outside wall panel production line process as following :
Feeder → Mixer → Feeder → Extruder → Extruder Mould →Two roller calender with Embossing →
Vacuum tank → Haul-off → punch → Cutting → Stacker→ Waste recycling machine (Crusher, Milling machine).
Printer, Water chiller and air compressor, pvc recycled granulating line and so on.
3. PVC decorative outside wall panel production line is composed as following
1. Powder feeder.
2. Conic double screw extruder for PVC,
Single screw extruder for protective layer
3. Extrusion mould, and calibrators.
4. Embossing machine.
5. Vacuum bath / vacuum tank.
6. Haul-off Unit.
7.Punch machine.
8. Cutting machine / Cutter.
9. Stacker.
10. Auxiliary machines:
SHR-200/500 or SHR-300/600mixer for PVC Powder.
SWP-360 SWP-400 plastic crusher.
SMP-500 Milling Machine.
4. Applicable raw materials: PVC, ASA, PMMA
5. Production speed: 0-8m/min, or 0-20m/min
6. Machinery electric parts details:
| Temperatue meter | Omron or RKC |
| Contactor | Schneider |
| Relay | Schneider |
| Transducer | Holip |
| Power light, button | Schneider |
| Inveter | ABB |
| Low voltage electrical appliances | Siemens |
7. PVC wall siding extrusion line pictures:
8. PVC Bamboo Fiber Decorative Wall Panel Making Machine.
1). PVC bamboo fiber wall panels
PVC Bamboo fiver wall panels are also called quick-fitted integrated wall panels, customer can choose wall panels colors by your personal preference, PVC wall panel widely used in hotels, restaurant, guesthouses, home decorations and other fields.
The performance and advantages of PVC bamboo fiber wall panels:
Low carbon environmental protection, Thermal insulation, Anti-corrosion durable, Waterproof, Easy to clean, Stylish and elegant, Save time and labor, Super Soundproofing.
2). PVC bamboo fiber wall board production line
Our company developed the PVC bamboo fiber wall board production line equipment is made in the PVC gusset ceiling on the basis of the beginning of the PVC deduction plate when the ceiling width of 180mm, 240mm, 320mm, 400mm, etc., now do PVC bamboo fiber wall Plate production line equipment can produce width 600mm to 800mm are no problem, a specifications of a set of molds, under normal circumstances a production line can produce ceiling board also can produce bamboo fiber wallboard products also known as PVC Weatherboard production line equipment, Just replace the mold.
3). Production line consists:
| 1 | Efficient hot and cooling Mixer SRL-Z200\500 or SRL-Z300\600 for PVC Powder+ additive+ bamboo fiber. | 1 set |
| 2 | Spiral loading device | 1 set |
| 3 | Double screw extruder SJSZ65\132 or SJSZ-80\156 | 1 set |
| 4 | Vacuum calibration table | 1 set |
| 5 | Transfer laminating machine | 1 set |
| 6 | Haul-off machine | 1 set |
| 7 | Cutting machine | 1 set |
| 8 | Stacker | 1 set |
| 9 | Crusher | 1 set |
| 10 | Milling machine | 1 set |
| 11 | PVC Granulating line for choice | 1 set |
4). The main technical data:
| Model | SJSZ-65|132 | SJSZ-65|132 | SJSZ-80|156 | SJSZ-80|156 |
| Auxiliary machine | YF-240 | YF-300 | YF-600 | YF-800 |
| Motor (kw) | 37 | 37 | 75 | 110 |
| Total power(kw) | 65 | 75 | 110 | 150 |
| Capacity (kg|h) | 200 | 250 | 350 | 450 |
| Material | PVC+Bamboo Fiber\wood powder | |||
9. Contact:
Ekaterina
+8615726275773